华为交换机配置链路聚合LACP示例

华为配置链路聚合LACP示例拓扑如下图所示：

<Quidway>system-view 

-----------------------------------------------------------

#####创建VLAN###############

<Quidway>vlan 99

[Quidway-vlan1000]quit

-----------------------------------------------------------

##########配置PC连接交换机接口##############

<Quidway>interface g1/0/1

[Quidway-GigabitEthernet1/0/1]port link-type access

[Quidway-GigabitEthernet1/0/1]port default vlan 99

------------------------------------------------------------

#########将接口加入到链路聚合端口中#########

<Quidway>interface Eth-Trunk 10

[Quidway-Eth-Trunk10]quit

<Quidway>interface g1/0/2

[Quidway-GigabitEthernet1/0/2]eth-trunk 10

[Quidway-GigabitEthernet1/0/2]quit

<Quidway>interface g1/0/3

[Quidway-GigabitEthernet1/0/3]eth-trunk 10

[Quidway-GigabitEthernet1/0/3]quit　

------------------------------------------------------------

#######将链路聚合口加入vlan 99中##########

<Quidway>interface Eth-Trunk 77

[[Quidway-Eth-Trunk10]port link-type access

[Quidway-Eth-Trunk10]port default vlan 99

[Quidway-Eth-Trunk10]mode lacp

-------------------------------------------------------

 ######查看Eth-Trunk 10的运行状态#######

<Quidway>display Eth-Trunk 10